濟南防水http://m.my1986.cn/介紹從功能上說伸縮縫必須滿足伸縮縫在溫度區段具有充裕的伸縮余地具有較強的抗漏能力，再就是在符合上述要求的前提下，解決措施力求經濟耐用，施工方便。那么具體應該如何進行施工呢？

1、濟南防水建議將樓板變形縫開鑿成“V”形，伸縮縫間用水泥、細沙和雙虹通用型漿料和成的水泥沙漿，然后把和成的水泥沙漿填入伸縮縫。
Jinan waterproof floor deformation joint proposal will cut into the "V" shape, between joints with cement, sand and a double rainbow and a general-purpose cement mortar slurry, and then filled into the cement mortar joints.

2、濟南防水提醒大家填伸縮縫時，要填得略有點突起，填完伸縮縫后，馬上用玻璃纖維網鋪上，然后用刮刀輕輕刮一遍，玻璃纖維網就陷進水泥沙漿的表面。
Jinan waterproof to remind you when to fill joints, to fill was slightly protruding point, after filling joints, immediately covered with a fiberglass mesh, and then use the spatula to gently scrape again, fiberglass mesh on the surface of cement mortar stuck.

3、濟南防水http://m.my1986.cn/談到等水泥沙漿干后（42小時）再在玻璃纖維網或者鋁片上涂刷雙虹柔韌性防水材料2-3遍，等防水層干后再做水泥沙漿保護層。
Jinan waterproof cement mortar, etc. Speaking after dry (42 hours) and then brushing the glass fiber mesh or aluminum double rainbow flexible waterproof material 2-3 times, and other waterproof layer dry before making a protective layer

of cement mortar.